Sharp O2 - Manual (Page 69)

Organiser 68
Note
• For the alarm to work, the phone must be switched
on. If you wish to use the phone as an alarm clock
you may be disturbed by incoming calls or messages
notifications.
Changing Alarm Settings
1. Perform steps 1 to 5 in “Setting Alarm” on page 66.
2. Select the number you wish to change by pressing
or , then press .
3. Change Alarm settings.
For details on changing Alarm settings, see “To
Change the Type of Alarm Tone” on page 67.
Disabling Alarm Function
1. Perform steps 1 and 2 in “Changing Alarm
Settings”.
2. Press or to select “Alarm Status”, then press
.
3. Press or to select “Off”, then press .
“ ” disappears from the screen.
Resetting an Alarm Setting
1. Perform steps 1 to 5 in “Setting Alarm” on page 66.
2. Select the number you wish to reset by pressing
or , then press .
3. Press or to select “Reset Alarm”, then press
.
4. Press or to select “Yes”, then press .
Resetting All Alarm Settings
1. Perform steps 1 to 4 in “Setting Alarm” on page 66.
2. Press
or to select “Clear All”, then press
.
3. Press or to select “Yes”, then press .
Voice Memo (M 5-4)
This allows you to record a voice message of up to 10
seconds, which can be used to remind you of schedule
entries or be sent within an MMS. The recorded voice
memo is registered in the Sound Gallery.
Recording a Voice Memo
1. Press
to display the Main Menu.
2. Press or to select “Organiser”, then press .
3. Press or to select “Voice Memo”, then press
.
4. Press to start recording.
To stop recording before the recording time is over,
press
[Stop].