Sharp R520_CJ16_MM_111009_F4 - Manual (Page 57)

Messaging 54
3. Press Send ( ) to save the
picture/video and begin the Picture/
Video message delivery process.
The Create Pic / Video Msg screen
appears in the display with the
Send To list highlighted.
4. Enter the phone number or Email
address of the recipient of the Picture/Video message, then
press .
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups and Recent Calls. These options allow you to find and add
recipients to the Send To list.
5. The Subject field appears in the
display. Enter a subject for the
Picture/Video message using the
keypad. (For more information,
refer to “Entering Text” on
page 35.)
6. Press the Down navigation key until the Text field is
highlighted, then enter the message text using the keypad.
(For more information, refer to “Entering Text” on
page 35.)
7. The new picture/video displays in the Picture / Video field.
8. If you wish to add a sound file to the Picture message,
highlight the Sound field and do the following; otherwise,
proceed to step 10.
• Press the Sounds soft key. The Ringtone screen appears in the
display showing the following options:
– Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
– Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on the phone.
Select an option, a sound file, and insert the sound into the message.
To exit the pop-up menu without inserting a sound, press .
9. Press the Options soft key to complete the message text
and set message send options.