Sun Microsystems 1.0 - Manual (Page 141)

Managing FDDI Stations Using SunNet Manager 115
9
The trap reports in Figure 9-7 were generated when a single-attached station
was reconnected to the ring.
Figure 9-7 Single-Attached Station Reconnected
SRF_Source=rully
TransitionTimeStamp: Parameter_Type=0x1034
Transition_TimeStamp.Hi=102
Transition_TimeStamp.Lo=845593304
MAC Neighbor Change Event: Parameter_Type=0x208f
Mac_Index=1
Multiple_Occurrence=0
NA_Condition=2
Old_UNA=0-1-1b-8-10-92
New_UNA=arbois
Old_DNA=10-0-4-b8-6e-ab
New_DNA=europe
Current_path=3
SMT_Address=rully
Source of trap report ------>
(neighbor to fault)
Trap indicates change
of neighbor ----------------->
Current neighbor --------->
Old neighbor returns ------>
SRF_Source=europe
TransitionTimeStamp: Parameter_Type=0x1034
Transition_TimeStamp.Hi=1
Transition_TimeStamp.Lo=2482471160
MAC Frame Error Condition: Parameter_Type=0x208d
Mac_Index=1
Condition_State=0
Frame_Ct=101367280
Error_Ct=0
Lost_Ct=8
Frame_Error_Ratio=0
Source of trap report ------>
(reconnected station)
Trap indicates error
condition ------------------->
Frames lost during
fault condition -------------->
Trap report generated by the upstream station
Trap report generated by the reconnected station