Siemens HIPATH V1.2.33 - Manual (Page 51)

Configuration Tab
51
Telephony Configuration (400 standard SIP V2.x/SIP V3.0,
600 office SIP V2.x)
Telephony Configuration (600 office HFA, 600 office U
P0/E
)
Parameter Setting
SIP Routing Model Æ page 67
SIP Transport Æ page 67
Register by name Æ page 64
Outbound proxy Æ page 62
SIP Server Address Æ page 67
SIP Server Port
*
*. For 600 office SIP V2.4 only.
Æ page 67
SIP Gateway Address Æ page 66
SIP Gateway Port * Æ page 66
SIP Registrar Address Æ page 67
SIP Registrar Port * Æ page 67
Beep On SIP Server Error Æ page 54
Session Timer Æ page 66
Session Duration (seconds) Æ page 66
Registration Timer (seconds) Æ page 64
Default domain name Æ page 56
Realm 1 Æ page 64
Emergency number Æ page 57
System name (max 10 ch)
**
**. For 400 standard SIP V2.x only.
Æ page 68
Parameter Setting
PBX/Gateway Address
*
*. Not for 600 office UP0/E.
Æ page 63
Status message transfer * Æ page 68
Operating mode Æ page 62