Siemens HIPATH V1.2.33 - Manual (Page 71)

Parameters
71
User password
Reset the user password. This option allows the administrator to delete a
user’s forgotten password and replace it with a new password.
Default: blank
VLAN Id
• The virtual LAN ID can only be set if Æ Layer 2 support is activated
( Æ QoS L2/L3).
• Enter a value between 0 and 4095 here. This value describes an asso-
ciation with a specific
Æ VLAN when using Æ VLANs.
VLAN Method
• You can only set this if Æ Layer 2 support is active (Æ QoS L2/L3).
• Specify where you should retrieve the Æ VLAN Id when using
Æ VLANs.
Voice mail
Call number of the message server.
WAP Mode
• This can only be configured for optiPoint 410 standard and 600 office
HFA, 600 office
UP0/E
, 600 office SIP V2.x.
• Select the protocol used for transferring data for WAP applications:
Æ HTTP or Æ WSP.
Windows Domain Name
Name of the Windows domain server at which the user is registered.
Windows Domain User ID
Name of the user as registered at the Windows domain server.
Manual The ID entered under Æ VLAN Id is used.
DHCP When using a Æ DHCP server, the ID supplied by
this server is used.