Siemens HIPATH V1.2.33 - Manual (Page 88)

Deployment Tool with TLS
88
At the top of the dialogue, an error message informs the user of one of two
scenarios:
•
The Tool was unable to find a suitable end-entity certificate. This may
mean that the received certificates were all CA certificates. However,
most likely, the configured target subject DN did not match the subject
DN of the received end-entity certificate. If so, the user can reconfigure
the target subject DN, as described above, and try again.
• The Tool does not trust the received chain. This means that none of
the certificates in the chain were issued by any of the Tool’s trusted cer-
tificates. If the received chain contains CA certificates, the user can de-
cide to trust the highest CA certificate by selecting it, and pressing the
“Trust Certificate” button at the bottom of the dialogue. The certificate
will be added to the Tool’s list of trusted certificates, and the user can
try again.
Transferring Certificates to Phones
The Phone Configuration Security Panel, accessed through the Operations
Pane, allows the user to transfer a file of server key material and a file of
client trusted certificates to a phone, and to delete these files from a
phone.