Sharp AR-BC260 - Manual (Page 94)

REDUCTION/ENLARGEMENT/ZOOM
5-16
7 Use the reduction, enlargement, and
ZOOM ([
], [ ]) keys to change the
copy ratio in the vertical (Y) direction.
A fixed ratio key will not
become highlighted
when touched.
When the reversing
single pass feeder is
used, the ratio can only
be set within the range
50% to 200%.
The zoom keys can be
used to change the ratio
from 50% to 200% in
increments of 1%.
Touch the [ ] key to
increase the ratio, or the
[
] key to decrease
the ratio. If you continue to touch either key for 3
seconds, the ratio begins to change quickly.
Either copy ratio can be changed for fine-tuning
until the next step is performed.
8 Touch the [OK] key.
9 Touch the [PAPER SELECT] key and
select the paper tray with the desired
paper size.
If the AUTO PAPER
SELECT mode is on, the
appropriate copy paper
size will have been
automatically selected
based on the original
size and selected copy
ratios.
10 Make all other desired settings such as
exposure, paper size and number of copies
and then press the [COLOR COPY START
(
)] or [BLACK COPY START ( )] key.
ZOOM
77 %
Y
A
X
64 %
50 %
77
50
ZOOM
%
%
%
Y
A
X
1
4
%
%
2
XY ZOOM CANCEL
OK
%
%
25 %
129 %
400 %
200 %
100 %
OR
PAPE
EX
AUTO
HEAVY PAPER
PLAIN PAPER
RANSPARENCY
ENVELOPE
PAPER SELECT
EXPOSURE
COPY RATIO
X-50% Y-100%
AUTO
ORIGIN L
To cancel this function, touch the [CANCEL] key or
the [XY ZOOM] key again as in step 3 or 5 on page
5-15.
ApollonII_general-copy_SEC.book 16 ページ ２００４年９月６日 月曜日 午後４時５７分