Sharp AR-BC260 - Manual (Page 30)

LOADING PAPER
2-8
Loading paper in the duplex module/2 x 500 sheet paper
drawer
Upper tray:
The upper tray contains a duplex module that automatically turns print paper over for automatic two-sided printing.
Middle and lower paper trays:
The middle and lower trays are paper trays.
Up to 500 sheets of paper recommended for color or SHARP recommended plain paper can be loaded in these trays.
The method of loading paper is the same as for paper tray 1 in the main unit. See the explanation on page 2-2.
Specifications (duplex module/2 x 500 sheet paper drawer)
Specifications are subject to change for improvement without notice.
NOTE
If the size of paper being loaded is different from the previous size, or is an extra size, or if the paper type is different
from the previous type, you must change the paper tray settings in the custom settings. Change the settings as
explained in "Setting the paper type" and "Setting the paper size when an extra size is loaded" on page 2-11.
Name Duplex module/2 x 500 sheet paper drawer (AR-D19N)
Paper size/weight
11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2", Extra. (A3, B4, A4, A4R, B5, B5R, A5)
/ 17 to 28 lbs. or 64 to 105 g/m
2
Paper capacity
Paper recommended for color (21 lbs. or 80 g/m 2 ): 500 sheets;
SHARP standard paper (21 lbs. or 80 g/m 2 ): 500 sheets
Power supply Supplied from the main unit
Dimensions
23-5/8" (W) x 25-9/32" (D) x 15-7/8" (H) (600 mm (W) x 642 mm (D) x 403 mm (H))
(not including the adjuster)
Weight Approximately 68.3 lbs. or 31 kg
Duplex module
Size of plain paper
11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2R",
5-1/2" x 8-1/2", A3, B4, A4, A4R, B5, B5R, A5
Weight of plain paper 17 to 54 lbs. or 64 to 200 g/m 2
Number of sheets One sheet (single pass type)
ApollonII_general-copy_SEC.book 8 ページ ２００４年９月６日 月曜日 午後４時５７分