Storing, deleting, and using original sizes, Storing or deleting an original size, Using a stored original size – Sharp AR-BC260 User Manual
Page 77: 4storing, deleting, and using original sizes, Auto, Auto original exposure
4-9
4
STORING, DELETING, AND USING
ORIGINAL SIZES
Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
copy that size of document.
● To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.
Storing or deleting an original size
1
Touch the [ORIGINAL] key.
2
Touch the [CUSTOM SIZE] key.
3
Touch the [STORE/DELETE] key.
4
Touch the original size key (
) that
you wish to store or delete.
To store an original size,
touch a key that does not
show a size (
).
Keys that already have
an original size stored
will show the stored size
(
).
To delete or change a stored size, touch the key
that shows the size that you wish to delete or
change.
●If you are storing an original size, go to step 5.
●To delete or change an original size, go to
step 7.
5
Enter the X (width) and Y (length)
dimensions of the original with the
keys.
X (width) is initially
selected.
Enter X and then touch
the (
) key to enter Y.
A width of 2-1/2 to 17
inches can be entered in
X, and a length of 2-1/2
to 11-5/8 inches can be entered in Y.
6
Touch the [OK] key.
The original size entered in step 5 is stored in the
key selected in step 4.
To exit, touch the [ORIGINAL] key.
7
When you touch a key that shows an
original size in step 4, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [STORE].
●To cancel the procedure, touch the [CANCEL]
key.
●To delete the selected original size, touch the
[DELETE] key.
●To change the original size stored in the key,
touch the [STORE] key. The screen of step 5
will appear to let you change the size.
8
To exit, touch the [ORIGINAL] key.
■
■
■
■ USING A STORED ORIGINAL SIZE
1
Follow steps 1 to 2 of "STORING OR
DELETING AN ORIGINAL SIZE".
2
Touch the original size key that you wish
to use.
3
Touch the [OK] key.
The stored original size is called up.
AUTO
AUTO
ORIGINAL
EXPOSURE
E INPUT
CUSTOM
SIZE
EXPOSURE
PAPER SELE
COPY RATI
100%
AUTO
AUTO
8 x11
MANUAL
AUTO
INCH
AB
1
/
2
L
STORE/DELETE
CUSTO
SIZE
MANUA
AUTO
RECALL
STORE/DELETE
X5 Y10
1
/
2
1
/
8
X5 Y10
1
/
2
1
/
8
CANCEL
OK
17
11 5/8
(2 1/2 17)
inch
RECALL
Y
X
A
X
Y
STORE/DELETE
(2 1/2 11 5/8)
inch
RECALL
STORE/DELETE
X5 Y10
1
/
2
1
/
8
ApollonII_general-copy_SEC.book 9 ページ 2004年9月6日 月曜日 午後4時57分