Samsung M6000 - Manual (Page 93)

Samsung M6000 User’s Manual About Drivers and System Resources 82
Make sure the Infrared port field in System Setup is set to 2F8,
IRQ 3. The field is in the Advanced Menu under I/O Device
Configuration.
The receiving device must be positioned properly. There must
be no more than three feet of distance between the computer’s
infrared port and the receiving infrared device.
The sending and receiving devices need to be on the same level
vertically. Place them on the same table if possible.
Make sure the infrared ports on the sending and receiving
devices face each other, with no more than a 30 degree angle
between the two infrared ports.
Make sure that nothing is obstructing the file transfer path
between the computer’s infrared port and the receiving infrared
device.
If you still cannot transfer a file, see the documentation for the
infrared software.
Making Backup Disks
All M6000 Series computers that ship from the factory include one
Microsoft Windows 98 or Windows NT 4.0 CD-ROM and one restore
CD-ROM. Computers shipped with Windows 98 installed include a
Boot Floppy diskette. The restore CD-ROM contains a copy of the
applications and drivers needed for computer’s operating system.
In the unlikely event that programs on the computer hard drive become
corrupted or are erased, you can use the Microsoft Operating System
CD-ROM and the restore CD-ROM to reinstall them. To restore
software, follow the directions included with the restore CD-ROM.
Service Pack 3 for Windows NT
Microsoft
®
Service Pack 3 (SP3) is included with computers shipped
from the factory with Windows NT installed. Any time you change or
add components to your Windows NT system, you need to reinstall
SP3.