Samsung M6000 - Manual (Page 85)

Samsung M6000 User’s Manual Working with PC Cards 74
Figure 19. Inserting a PC Card
Windows 98
Windows 98 automatically assigns computer resources (such as
communication ports and memory addresses) to a PC Card installed in
your computer. For further information on configuring a PC Card in
Windows 98, see the index entry PC card in the Windows Help.
Windows 98 also handles power management for PC Cards.
To remove a PC Card from your computer:
Use the following procedures to remove PC Cards, or you
may lose data that is being stored to a card.
1. Click the PC Card icon on the taskbar.
2. Click Stop for the card you want to remove. A message appears
telling you it is OK to remove the card.
3. Push the card eject button on the side of the PC Card slot.
4. Pull the card out of the PC Card slot.
Windows NT
Systemsoft Card Wizard is shipped with notebook computers that use
Windows NT as the operating system. When you install a PC Card,
CardWizard attempts to configure it automatically. If Card Wizard
PC Card
Eject button