Samsung M6000 - Manual (Page 104)

Samsung M6000 User’s Manual Using Options 93
Before handling a memory module, discharge any static
electricity by touching a grounded surface or using a grounding
wrist strap.
Do not insert objects with conductive material, such as metal
screwdrivers or graphite pencils, into the memory-module
compartment.
Installing a Memory Module
Handle memory modules carefully. Hold them
only by the edges.
To install a memory module:
1. Turn the computer over so that the bottom faces up.
2. Using a Phillips screwdriver, remove the screw that holds the
memory-module compartment door in place (Figure 21).
Figure 21. Removing the Memory Module Compartment Door
3. Grasp the edge of the door and pull the door off the chassis.
4. Remove installed modules if necessary:
When removing modules, pull on the plastic
portion of the connector slots tabs only. Do not