SMC Networks EtherNet/IP EX500-GEN1 - Manual (Page 21)

39 38
Display
1. EX9-OET1/EX9-OET2/EX9-OEP1/EX9-OEP2
0 Lights on : Output ( OUT 0 ) is ON.
Lights off : Output ( OUT 0 ) is OFF.
1 Lights on : Output ( OUT 1 ) is ON.
Lights off : Output ( OUT 1 ) is OFF.
Display Description
PWR PWR
2. EX9-PE1
PWR Lights on : Power is supplied from external power
supply.
Lights off : Power is not supplied from external
power supply.
Display Description
Specification
1. EX9-OET1/EX9-OET2/ EX9-OEP1/EX9-OEP2
No. of output
points
2 points/unit
Output
method N-ch MOS-FET
( open drain )
Insulation
method
Optical isolation ( with SI unit )
Optical isolation ( with this unit )
( Note )
Item
Model No.
Specification
EX9-OEP2
P-ch MOS-FET
( open drain )
EX9-OEP1
N-ch MOS-FET
( open drain )
EX9-OET2
P-ch MOS-FET
( open drain )
EX9-OET1
Note : To be used in combination with EX9-PE1.
For detailed specifications, refer to the instruction manuals, technical data, etc. of EX9
series general purpose output block.
Rated voltage 24VDC +10%, -5%
Supply current 3A Max.
Item Specification
2. EX9-PE1