SMC Networks EtherNet/IP EX500-GEN1 - Manual (Page 18)

33 32
2. EX9-PE1
VQC series
SI unit for
general purpose
output block
( EX500-Q 02 )
Dimensions ( unit : mm )
21.2
59.8
72.6
21
26.7
22.2
43.2
1. EX9-OET1/EX9-OET2/
EX9-OEP1/EX9-OEP2
21.2
59.8
80.3
22.2
43.2
21
26.7
PWR PWR
2. EX9-PE1
Power supply connector 1 Unused
Power input connector 2 Supplies power for output devices. ( Note1 )
Power LED 3 Indicates the power supply status. ( Note2 )
Part name No. Application
Note1 : For wiring method, refer to subsection "Wiring" ( page 35 ) of section "EX9 Series
General Purpose Output Block" in this manual.
Note2 : For display, refer to subsection "Display" ( page 39 ) in section "EX9 Series General
Purpose Output Block" in this manual.
EX9 Series General Purpose Output Block Part Names
The EX9 series general purpose output block is the unit to operate solenoid valve, relay,
etc. in combination with VQC and SV ( tie-rod ) series valve and applicable SI unit.
There are two types ---- one type is for low wattage load ( EX9-OET1 or EX9-OET2 ) that
outputs signals by receiving power supply from SI unit, and the other type is for high
wattage load ( EX9-OEP1 or EX9-OEP2 ) that outputs signals by receiving power supply
from outside. The type for high wattage load is used in combination with the power block
( EX9-PE1 ) connected with external power supply. As the low-wattage-load type is
powered from SI unit, the wattage of load is limited to 1.0W ( Note ). For a load up to
12W, use the power block and the high-wattage-load type.
Note : When connected with EX500 series.
1. EX9-OET1/EX9-OET2/EX9-OEP1/EX9-OEP2
VQC series
SI unit for
VQC series
( EX500-Q 02 )
Output connector 1 Connects with output device. ( Note1 )
Indicator LED 2 Indicates the output status. ( Note2 )
Part name No. Application
Note1 : For wiring method, refer to subsection "Wiring" ( page 35 ) of section "EX9 Series
General Purpose Output Block" in this manual.
Note2 : For display, refer to subsection "Display" ( page 39 ) of section "EX9 Series General
Purpose Output Block" in this manual.