Motorola TimePort 280 - Manual (Page 177)

177
Troubleshooting
When sending
data with the
data cable, why
does the
computer show a
connection rate
of 19.2 Kbps
(19200 bps)? 19.2 Kbps (19200 bps) is the data
transfer rate of the connection between
your computer and the phone in a
standard CSD (Circuit Switch Data)
connection. The rate of the connection
between your phone and the network is
displayed on your phone, and will be
either 14.4 or 96.0 Kbps (14400 or
9600 bps).
Note: A GPRS connection may have a
higher data transfer rate.
I can’t end my
data call by
closing the
application on
my computer.
What can I do? Try pressing
O
on your phone. Also try
disconnecting the cable or turning off
the phone. If possible, always close the
connection through your computer.
These alternative methods may disrupt
the application on your computer.
I launched the
micro-browser
but the display
says:
6HUYLFH 1RW
$YDLODEOH .
You may be in an area without service,
or you may be connected to a network
that does not support Internet access.
I launched the
micro-browser
but the display
says:
'DWD 6HUYHU
8QDYDLODEOH .
Try again in a few minutes. The servers
may be temporarily busy.
2TQDNGO 5QNWVKQP
User.Guide.GSM.book Page 177 Wednesday, July 11, 2001 5:07 PM