Motorola TimePort 280 - Manual (Page 158)

158
Data and Fax Calls
Sending a Data or Fax Call
You can connect your phone to a computer or hand-held device
to send data or a fax from the connected device.
Use this feature to transfer data from your computer onto
another device, and to synchronise phonebook and datebook
information between your phone, computer, and/or hand-held
device.
Connect your phone (see “Connecting Your Phone to an External
Device” on page 154) and do the following:
Receiving a Data or Fax Call
You can connect your phone to a computer or hand-held device
to receive data or a fax.
Use this feature to transfer data to your computer from another
device.
&Q 6JKU 6Q
1 Check the phone make sure that the phone is
connected and powered on
2 Open the
application on
your computer place the call through the application
(such as dial-up-networking or fax)
Note: You cannot dial data or fax
numbers through your phone’s
keypad. You must dial them through
your computer.
3 End the transfer
on your computer close the call and connection when
the transfer is complete
User.Guide.GSM.book Page 158 Wednesday, July 11, 2001 5:07 PM