Sun Microsystems Sun Fire V880 - Manual (Page 75)

Maintaining PCI cards
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 75
!
DANGER: !
DANGER:
Be sure to turn the key switch to the Forced Off position before handling any
internal components. Otherwise, it is possible for a user to restart the system
remotely while you are working inside it. The Forced Off position is the only key
switch position that prevents an RSC user from restarting the system.
6. Open the left door.
7. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See Using an ESD wrist strap on page 59 for more
information.
8. Disconnect the monitor cable connected to the card.
9. Pinch the purple PCI card retaining clip until it releases from the back of the card and
rotate the clip outward. See the following figure.