Sun Microsystems Sun Fire V880 - Manual (Page 116)

Maintenance
116 Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006
Adding disk drives (optional)
If you are adding a pair of data disks (optional), you can hot-plug the disk drives without shutting
down the system.
To add a pair of data disks:
1. Unlock and open the front door.
2. Enter the following commands:
cd /
luxadm insert
The following message is displayed:
3. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See Using an ESD wrist strap on page 59 for more
information.
4. Release the drive handle on the replacement disk drive. Use your thumb and forefinger to
pinch the drive latch upward to open it.
5. Align the disk drive with slot 2. Orient the drive so that the drive handle hinge faces the
bottom of the drive bay.
Please hit when you have finished adding Fibre Channel Enclosure(s)/
Device(s):