Sun Microsystems Sun Fire V880 User Manual
Page 188
Troubleshooting
188
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
May 2006
3. Enter:
probe-scsi-all
The program displays a message that is similar to the following:
4. Verify that the DVD drive is recognized. This example shows the default SCSI devices, the
tape drive (target 5), and the DVD drive (target 6).
If the test fails to show all of the installed SCSI drives, you may have to replace the drive.
5. When you finish testing, enter the following commands:
CAUTION:
!
CAUTION:
If you fail to enter these commands, any reboots that you do in the future will stop
at the boot prompt instead of proceeding through the normal boot-up process.
setenv auto-boot? true
boot -r
The system reboots.
/pci@8,600000/SUNW,qlc@2
LiD HA LUN
--- Port WWN ---
-----Disk description -----
0
0
0
21000004cf72f08f
SEAGATE ST373405FSUN3660438
1
1
0
21000004cf721553
SEAGATE ST373405FSUN3660438
2
2
0
21000004cf7213ea
SEAGATE ST373405FSUN3660438
6
6
0
508002000016b5b1
SUNW
SUNWGS INT FCBPL9224
3
3
0
21000004cf72114b
SEAGATE ST373405FSUN3660438
4
4
0
21000004cf7211ae
SEAGATE ST373405FSUN3660438
5
5
0
21000004cf7214a3
SEAGATE ST373405FSUN3660438
/pci@8,700000/scsi@1
Target 5
Unit 0
Removeable Tape
HP
C5683A
C005
Target 6
Unit 0
Removeable Read Only device
TOSHIBA DVD-ROM SD-M14011009
/pci@8,700000/pci@5/SUNW,1sptwo@4