Siemens Simatic Industrial PC IPC427C - Manual (Page 73)

Maintenance and Service
11.2 Reinstalling the operating system
SIMATIC IPC427C
Operating Instructions, 04/2009, A5E02414743-01
73
11.2 Reinstalling the operating system
11.2.1 Windows Embedded Standard 2009
11.2.1.1 General installation procedure
If your software becomes corrupt for any reason, you can reinstall it from the
Restore CD/DVD. The Restore CD/DVD contains an image file for the hard disk or CF card
with the original software (operating system with installed hardware drivers).
Note
You require a USB keyboard and a USB CD-ROM drive to reinstall the operating system.
Before performing the new installation, you should check the date and time set in the BIOS
Setup (Page 117) and correct it if necessary.