Siemens Simatic Industrial PC IPC427C - Manual (Page 39)

Commissioning
7.2 Commissioning - Windows Embedded Standard 2009
SIMATIC IPC427C
Operating Instructions, 04/2009, A5E02414743-01
39
Switch off the device
When you work with Windows Embedded Standard , always shut down the PC with the
command Start > Shut Down.
Note
The Enhanced Write Filter should be enabled following the installation of Windows
Embedded Standard on a CompactFlash card or SSD drive. When this is enabled, the
device can be switched off with the power switch by disconnecting the power supply.