Siemens Simatic Industrial PC IPC427C - Manual (Page 124)

Detailed descriptions
16.2 BIOS Setup
SIMATIC IPC427C
124
Operating Instructions, 04/2009, A5E02414743-01
"SATA Configuration" submenu
Figure 16-10 "SATA Configuration" submenu
SATA Controller [Enabled]
[Disabled]
Disables or enables the SATA controller
[Enhanced] Serial ATA Ports 0/1 work in Legacy Mode.
Serial ATA Ports 4/5 work in Native IDE Mode.
Native PCI Serial ATA Ports 0/1/4/5 work in Native IDE Mode.
AHCI Serial ATA Ports 0/1 work in AHCI Mode (only relevant
for IPC427C).
SATA Controller mode
AHCI OpRom
Support
Serial ATA Ports 0/1/4/5 work in AHCI Mode with the
ROM support option (setting for Panel PC; not relevant
for IPC427C).