Siemens Simatic Industrial PC IPC427C - Manual (Page 42)

Commissioning
7.4 Commissioning - other operating systems
SIMATIC IPC427C
42
Operating Instructions, 04/2009, A5E02414743-01
7.4 Commissioning - other operating systems
7.4.1 Commissioning - guide
The desired operating system can be installed on the hard disk, CompactFlash card or SSD
drive. A variety of USB devices (hard disk, external floppy or CD-ROM drive, USB stick) or
Compact Flash cards can be used as boot media.
,QVWDOOLQJWKH
RSHUDWLQJV\VWHP
IURPWKHERRWPHGLXP 6HOHFWLQJWKHDFWLYH
ERRWPHGLXP
&RPPLVVLRQLQJ
6,0$7,&,3&&
6HOHFWLQJFUHDWLQJ
WKHERRWPHGLXP
IRULQVWDOODWLRQ
The following provides an overview of the steps involved in commissioning:
Steps Description
1 Select and create a boot
medium for installation.
Select a suitable boot medium for the operating system to be
used in the BIOS Setup (CD-ROM drive, Compact Flash card,
hard disk or USB device). See Boot menu (Page 126).
If no boot medium is available, one must be created based on
the instructions provided by the respective operating system
documentation.
For example, you can use the SIMATIC PC/PG Image Creator
tool to make a USB stick a bootable medium.
2 Install the operating system
on the boot medium.
Install the operating system based on the instructions provided
by the respective documentation.
3 Select final boot medium In the BIOS Setup, select the medium on which the operating
system has been installed.
Additional information
Further information about installation and commissioning is available in the documentation of
the respective operating system.