Siemens Simens Gigaset WLAN dsl/cable SE551 - Manual (Page 86)

86
Configuring the Advanced Settings
Gigaset SE551 WLAN dsl/cable / ENG / A31008-M1029-B101-2x-7619 / configure_router.fm / 03.11.2008
Sc
hablone 200
4_12
_27
Web Server
Your device's integrated Web server allows you to publish data on a connected USB bulk
memory (e.g. USB stick or USB hard disk) on the Internet.
Internet users can access your Web server by entering the public IP address in their Inter-
net browser. As Internet providers often change this each time someone dials in, it is
worth using dynamic DNS (see page 66) in addition.
ì
Connect a USB data carrier to the Gigaset SE551 WLAN dsl/cable via the USB port.
On the Advanced Settings – USB screen, you can check the status of the connec-
tion to the USB bulk memory.
ì
In the Advanced Settings menu, select Web Server.
ì
Activate your device's integrated Web server.
ì
Select the Partition on the connected data carrier to which you wish to save the data
for the Web server.
Note:
Depending on the status of the software in your device, it is possible that not all
Web server functions will work exactly as described below. If necessary, check
whether a software upgrade is offered on the Internet.