Siemens Simens Gigaset WLAN dsl/cable SE551 User Manual

Page 32

Basic Setup Wizard

Gigaset SE551 WLAN dsl/cable / ENG / A31008-M1029-B101-2x-7619 / configure_router.fm / 03.11.2008

hablone 200

4_12

_27

Select how Internet sessions are to be established via Connection mode:
– Select Always on if the connection is to exist at all times when the Gigaset SE551

WLAN dsl/cable is switched on.

– Select Connect on demand if applications such as a Web browser or an e-mail

program are to connect to the Internet automatically.

– In the Idle time before disconnect field, enter a period of time after which the

Internet connection is to be automatically ended if no data is transmitted (default
setting: 3 minutes).
You can deactivate this function by entering "0". This means that the connection

will continue to exist even if no data is transmitted. If you have a time-based tariff

this can cause high charges. In this case you should enter a value other than "0".
This time setting only applies to the Connect on demand option.

– Select Connect manually if you always want to establish and end the connection

to the Internet manually. If you have a time-based tariff this will save you high
connection charges. How to establish a connection manually is described on
page 95.

Click on Test Settings to check the Internet connection. The router will attempt to
connect to the Internet. Any Internet connection already in existence will be closed
first.
You will find information about the test steps and results on the Internet Connec-
tion Test screen.

PPPoE pass-through
PPPoE pass-through enables you to use an additional Internet connection (with another
service provider) from one PC. You can find detailed information about this on page 49.

Activate PPPoE pass-through if you wish to use this function.

When you have entered the data, click on Next >.

Using UPnP (Universal Plug and Play)
PCs with

UPnP

(Universal Plug & Play) can offer their own network services and automat-

ically use services offered on the network. You can find detailed information about this
on page 47.

Activate UPnP if you wish to use this function.

Please remember:
If you have a time-based tariff this option can result in high connection
charges.