Siemens Simens Gigaset WLAN dsl/cable SE551 - Manual (Page 80)

80
Configuring the Advanced Settings
Gigaset SE551 WLAN dsl/cable / ENG / A31008-M1029-B101-2x-7619 / configure_router.fm / 03.11.2008
Sc
hablone 200
4_12
_27
Entering PCs manually:
ì
Enter the required PCs with MAC address and Device name in the appropriate
fields.
ì
Click on the Add button to add the entry to the list.
ì
Click on the Delete button to delete the entry from the list.
ì
Apply the settings by clicking OK.
Selecting from the list of logged-in PCs
ì
From the Known wireless clients list (all PCs that currently have access to the
Gigaset SE551 WLAN dsl/cable), select the PC you want to add to the access control.
ì
Click on the Add button to add the entry to the list.
ì
Apply the settings by clicking OK.
Please remember:
If you activate MAC access control, you must at least enter the PC from which you
are configuring the Gigaset SE551 WLAN dsl/cable. Otherwise you will no longer
be able to access the user interface and a corresponding error message will be
shown.
If, by mistake, you have denied all PCs access to the Gigaset SE551 WLAN dsl/cable
you have two choices:
u You can completely reset the Gigaset SE551 WLAN dsl/cable (see page 18).
u You can connect a PC to the Gigaset SE551 WLAN dsl/cable using one of the
LAN connections. As MAC access control only applies to PCs that are con-
nected wirelessly, you can use this PC to change the configuration.