beautypg.com

Ieee 802.11g, Firewall, Half duplex – Siemens Simens Gigaset WLAN dsl/cable SE551 User Manual

Page 133: Full duplex, Depending on the per, Flat rate, Gateway, Ieee

background image

133

Glossary

Gigaset SE551 WLAN dsl/cable / ENG / A31008-M1029-B101-2x-7619 / glossary.fm / 17.11.2008

Sc

hablone 200

4_12

_27

Firewall
Firewalls are used by network operators as protection against unauthorised external
access. This involves a whole bundle of hardware and software actions and technologies
that monitor and control the data flow between the private network to be protected and
an unprotected network such as the

Internet

.

See also

NAT

Flat rate
Flat rate is a particular billing system for

Internet

connections The

Internet Provider

charges a monthly fee regardless of the duration and number of logins.

Full duplex
Data transmission mode in which data can be sent and received at the same time.
See also

Half duplex

Gateway
A gateway is a device for connecting networks with completely different architectures
(addressing, protocols, application interfaces etc.). Although it is not totally correct, the
term is also used as a synonym for

Router

.

Global IP address
See

Public IP address

Half duplex
Operating mode for data transfer. Only one party can receive or send data at a time.
See also

Full duplex

HTTP Proxy
An HTTP proxy is a

Server

that network components use for their

Internet

traffic. All

requests are sent via the proxy.

Hub
A Hub connects several network components in a star-topology network by sending all
the data it receives from one network component to all the other network components.
See also:

Switch

,

Bridge

,

Router

,

Gateway

IEEE
Institute of Electrical and Electronic Engineers
The IEEE is an international body for defining network standards, especially for stand-
ardising

LAN

technologies, transmission protocols and speeds, and wiring.

IEEE 802.11

IEEE

802.11 is a standard for wireless LANs operating in the 2.4 GHz band. In so-called

Infrastructure mode

, terminals can be connected to a base station (

Access Point

) or they

can connect with each other spontaneously (

Ad-hoc mode

).