Siemens 4100 Series - Manual (Page 67)

Router User’s Guide Troubleshooting
Interpreting the LED Display
The LED indicators on the front of the router give you a visual clue to the router activity. When the router
is configured and working correctly, all LED indicator lights briefly turn a solid green. The following table
shows the possible states indicated by the LEDs. If the LEDs indicate a problem, refer to “Resolving
Specific Issues” later in this chapter.
LED pwr dsl USB enet*
Off No power to
router - No power to router
- DS L signal not
detected
- No power to
router
- No USB device
connected
- USB driver not
installed or
installed
incorrectly
- No power to
router
- No Ethernet
device connected
- Wrong Ethernet
cable used
(cross- over
instead of
straight-through)
Green Normal system
operation Connected and ready for
data traffic Normal USB
operation, link okay,
no user traffic Normal Ethernet
operation, link okay,
no user traffic
Blinking
Green N/A - Steady blinking:
DSL attempting to
connect
- Sporadic blinking:
DSL connected and
user traffic flowing USB user traffic
flowing in either
direction Ethernet user traffic
flowing in either
direction
Blinking
Red/
Green Flash Write in
progress N/A N/A N/A
Red - POST tests in
progress (first
30 sec. after
powering on or
rebooting)
- POST error
occurred N/A N/A N/A
64