Checking tcp/ip settings (windows 2000), Windows 2000 – Siemens 4100 Series User Manual
Page 14
Router User’s Guide
Operating System Configuration
Checking TCP/IP Settings (Windows 2000)
1. On the Windows taskbar click Start>Settings>Control Panel. This
displays the “Control Panel” window.
2. Double-click
Network and Dial-up Connections. This displays the
“Network and Dial-up Connections” window.
3. Right-click
Local Area Connection and select Properties. This
displays the “Local Area Connections Properties” window.
4. Select the TCP/IP protocol for your network card.
5. Click
Properties. This displays the “Internet Protocol (TCP/IP)
Properties” window.
6. Select
the
Obtain an IP address automatically and Obtain DNS server address automatically
options. Exit back to the Control Panel.
7. Restart your computer to ensure it obtains an IP address from the Router.
8. Configure internet access using the procedure described in
.
11