Sharp DV-RW2U - Manual (Page 61)

61
To Cancel the AV AUTO
REC Function
Before Recording
Press POWER.
• The recorder is turned on and the AV
AUTO REC indicator will be turned
off.
POWER OPEN/CLOSE CHANNEL TIMER ON/OFF
REC
DISC TIMER
AV AUTO REC
STANDBY
TIMER DISC IN
AV AUTO REC
During Recording
Press and hold REC MODE for more
than 2 seconds.
• The AV AUTO REC indicator will be
turned off and become normal
recording mode. Press
■STOP to
stop recording.
• Timer recording is given priority when
timer recording and AV AUTO REC
times overlap.
Automatic Recording of Satellite Broadcust (AV AUTO REC)
EDIT
100
OPEN/
CLOSE POWER
SKIP
SEARCH
AUDIO
TIMER
ON/OFF
TITLE MENU
ANGLE
SETUP/
FUNCTION DNR
RETURN
REV FWD
SET/
ENTER
VCR PLUS+
TIMER PROG.
REC MODE
PROGRAM AM/PM ERASE
STILL/PAUSE REC
PLAY
STOP
SLOW SKIP
F.ADV
ORIGINAL/
PLAY LIST
DISC
TIMER
CH
DISPLAY
ON
SCREEN
POWER INPUT VOL
CH
TV CONTROL
ZOOM INPUT
NOTE
• When recording PPV (pay-per-view)
programs of satellite broadcasts, always
make sure to set the satellite receiver, etc.
to “Record”. Certain programs may not be
able to be recorded or require additional
charges.
• Only DVD-RW Ver. 1.1 (CPRM-compatible)
discs in the VR mode can be used to
record “Copy-once” satellite broadcasts,
etc.
• Use AV AUTO REC in combination with a
satellite broadcast receiver, etc. equipped
with a programming function.
• Since the power of this recorder is
switched on after the video signal from a
satellite receiver, etc. has been received,
the start of a program may not be
recorded.
• When a timer recording is started during
AV AUTO REC, since disc information is
written at the point recording switches to
timer recording, the start of timer recording
is delayed by a maximum of about 1
minute.
• AV AUTO REC cannot be set while the
simple recording timer is being set.
• In the case AV AUTO REC starts after the
start of timer recording, the recording
mode will be the one set with timer
recording.
DV_RW2U#p54-61.p65 03.1.9, 7:39 PM 61