Sharp DV-RW2U - Manual (Page 29)

29
DVD Playback
Playback the
playback-only discs
DVD VIDEO
1
Turn on the TV and switch the TV
channel to the external “VIDEO”
or “AV” channel connected to the
VIDEO/AUDIO output jacks.
2
Press POWER. The recorder is
turned on.
3
Press OPEN/CLOSE to open the
disc tray.
4
Load a disc onto the tray.
• Position it with the printed title side
facing up, align it with the guides.
• When you load a double-sided disc,
load it with the side you want to play
face down.
5
Press OPEN/CLOSE to close the
disc tray.
• When the disc is being identified
(“LOAD” is displayed on the Front
Panel Display), the DISC IN indicator
on the front panel is blinking. The
indicator lights when the disc is
finished being identified (“LOAD”
disappears).
• Some discs start playback automati-
cally.
6
Press | | | | |PLAY to start playback.
• If you’re playing some DVD-Video
discs, a disc menu screen may
appear. See page 45 for how to
operate the menu.
7
Press ■STOP to stop playback.
• When starting playback from the
place last stopped, go to step 8.
• When starting playback from the
beginning, go to step 9.
Playback
Resume Function
This recorder stores the location where you
stopped the disc. This function enables you
to resume the playback from the place last
stopped.
8
Press | | | | |PLAY after pressing
■STOP in the step 7.
• Play resumes from a point slightly
before the point where it was
stopped.
• Resume information will not be
canceled if the power is turned off.
• Resume function may not work on
some discs.
RES.
DVD
NOTE
The resume function is canceled in the
following cases.
• When you press
■STOP during auto-
playback.
• When you open the disc tray.
• When you display the DiscNavi screen.
• When a DVD-R/RW disc has been edited or
finalized after playback has been stopped.
• When you switch between ORIGINAL and
PLAYLIST.
Playback From the Beginning
9
Press
■STOP again.
10
Press | | | | |PLAY.
NOTE
• When taking out a disc, first press ■STOP
before taking out the disc. When the
OPEN/CLOSE is pressed during playback,
it may take a short time for the tray to open.
• In cases when a disc cannot be played
back as a result of inserting a non-standard
disc or the presence of scratches and so
forth on the disc “INCORRECT TYPE.
REMOVE DISC.” will appear and all other
functions of the recorder will be disabled
except for opening and closing of the tray.
Take out the disc when this happens.
EDIT
100
OPEN/
CLOSE POWER
SKIP
SEARCH
AUDIO
TIMER
ON/OFF
TITLE MENU
ANGLE
SETUP/
FUNCTION DNR
RETURN
REV FWD
SET/
ENTER
VCR PLUS+
TIMER PROG.
REC MODE
PROGRAM AM/PM ERASE
STILL/PAUSE REC
PLAY
STOP
SLOW SKIP
F.ADV
ORIGINAL/
PLAY LIST
DISC
TIMER
CH
DISPLAY
ON
SCREEN
POWER INPUT VOL
CH
TV CONTROL
ZOOM INPUT
DV_RW2U#p29-36.p65 03.1.9, 8:16 PM 29