Sharp DV-RW2U - Manual (Page 50)

50
Stop Recording
VR MODE
DVD RW
VIDEO MODE
DVD RW DVD R
Press ■STOP during recording.
• Stop recording before you remove the
disc from the recorder,
NOTE
• Since images are recorded in 30 second
units in the Video mode (1 minute units in
the LP mode), images may be briefly
recorded after recording has been
stopped. In this case, if recording is
stopped after first pausing the recording, a
black screen will be recorded for up to 30
seconds (or up to 1 minute in the LP
mode).
• A black screen may be recorded at the end
of a recording when a recording in the VR
mode is stopped after pausing.
• Erase recorded titles when they are no
longer required (page 71). In the case of a
disc recorded in the VR mode, remaining
recording time increases by the amount of
original titles erased. In the case of discs
recorded in the Video mode, although titles
are no longer displayed, remaining
recording time does not increase. (In the
case of DVD-RW discs, remaining
recording time only increases when the last
title has been erased.)
• ■STOP does not function for the first 5
seconds of a recording. (Press
■STOP 5 or
more seconds after recording begins.)
TV Program Recording
EDIT
100
OPEN/
CLOSE POWER
SKIP
SEARCH
AUDIO
TIMER
ON/OFF
TITLE MENU
ANGLE
SETUP/
FUNCTION DNR
RETURN
REV FWD
SET/
ENTER
VCR PLUS+
TIMER PROG.
REC MODE
PROGRAM AM/PM ERASE
REC
PLAY
STOP
SLOW SKIP
F.ADV
ORIGINAL/
PLAY LIST
DISC
TIMER
CH
DISPLAY
ON
SCREEN
POWER INPUT VOL
CH
TV CONTROL
STILL/PAUSE
ZOOM INPUT
Useful Recording
Functions
■ Watching Other TV Programs while
Recording
• The TV channel can be changed by
pressing the channel button on the TV. The
TV can also be turned off.
■ Accurately Starting Recording from a
Desired Part
When recording onto a DVD-RW or DVD-R
disc, a brief amount of time is required until
recording begins (about 2 seconds for
DVD-RW discs and about 10 seconds for
DVD-R discs). Start recording using the
following procedure when you want to start
recording at a precise time.
Æ When recording onto a DVD-RW disc:
• Press STILL/PAUSE Immediately
after earlier pressing ÆREC to pause
recording, and then once the record-
ing reaches the scene you want to
record, press ÆREC to start recording
from that scene.
• ■STOP does not function while
recording is paused. If you want to
stop recording, press
■STOP after
waiting at least 5 seconds after
recording has started.
Æ When recording onto a DVD-R disc:
• Set the “R REC START” setting of the
“RECORD SETUP” to “2 PRESS”.
Recording is paused for about 10
seconds later after ÆREC is pressed
once. When ÆREC is pressed for a
second time while recording is
paused, you can accurately start
recording from the scene you want to
record.
• If “R REC START” of the “RECORD
SETUP” is set to “1 PRESS”, recording
starts automatically about 10 seconds
later after ÆREC is pressed (the
Pause function does not function).
DV_RW2U#p45-53.p65 03.1.9, 7:39 PM 50