Sharp DV-RW2U - Manual (Page 102)

102
Angle
Chapter
Number
Digital Gamma
Digital Super
Picture
DiscNavi
Dolby Digital
(5.1 channel)
Dolby Digital
output level
DTS
Exact Rec
EZ Set Up
Finalization
Initialization
Letter Box
LB 4:3
Linear PCM
Sound
MP3
Original (ORG)
Glossary
Recorded onto some DVD discs are scenes which have been simultaneously shot from
a number of different angles (the same scene is shot from the front, from the left side,
from the right side, etc.). With such discs, you can select the angle on Function Control
Screen to view the scene from different angles.
These numbers are recorded on DVD discs. A title is subdivided into many sections,
each of which is numbered, and specific parts of video presentations can be searched
quickly using these numbers.
Corrects for gradations in dark areas of images to make images clearer.
Enhances the fine detail of the image and outlines of the objects it contains.
DiscNavi displays a list of the first scene of each titles when playing a DVD-R/DVD-RW
disc recorded in this recorder.
A sound system developed by Dolby Laboratories Inc. that gives movie theater ambi-
ence to audio output when the product is connected to a Dolby Digital 5.1 channel
processor or amplifier.
Setting that increases the average volume of Dolby Digital audio when playing a DVD.
This is a digital sound system developed by Digital Theater Systems for use in cinemas.
This system uses 6 audio channels and provides accurate sound field positioning and
realistic acoustics. (By connecting a DTS Digital Surround decoder, you can also listen
to DTS Digital Surround sound.)
This function automatically changes the recording mode to prevent recordings from
running out before they are finished due to a lack of available disc space by comparing
the available disc space and the time required for the timer recording.
Tuner channels and clock are automatically set for both Air and Cable channels.
Finalization is required to play DVD discs with another DVD player or DVD video-
compatible PC.
Initialization is required when using DVD-RW discs in the Video mode.
Screen size that cuts off the top and bottom of the image to allow playing of Wide (16:9)
software on a connected 4:3 TV.
Linear PCM is a signal recording format used for Audio CDs.
The sound on Audio CDs is recorded at 44.1 kHz with 16 bits. (On DVD discs, sound is
recorded at between 48 kHz with 16 bits and 96 kHz with 24 bits.)
One type of audio compression that uses MPEG1. This format compresses sound to
about 1/10, without impairing the original sound quality.
An image of title created when they are recorded the disc is called “Original”.
DV_RW2U#p100-104.p65 03.1.9, 7:53 PM 102