Sharp DV-RW2U - Manual (Page 52)

52
VR MODE
DVD RW
VIDEO MODE
DVD RW DVD R
The VCR Plus+ Programming System allows
you to program your recorder for timer
recording simply by inputting the PlusCode
Programming number.
The PlusCode numbers are listed in most
newspaper, television guides, and local CATV
listings. Simply by inputting this PlusCode
number, you can program your recorder for
timer recording, eliminating the need to input
program start time, stop time, channel, date
and other information necessary for timer
recording.
Up to 8 timer programs can be stored in the
recorder.
1
Press POWER and load a
recordable disc.
• Timer recording does not work during
loading a disc. Start the timer setting
after the disc is finished being
identified.
Important!
• Check that the clock is displaying the
correct time.
• When you record SAP broadcast, setting
“SAP” in “RECORD SETUP” to “ON” (See
page 87).
• When you press ■STOP to stop timer
recording, the timer standby mode will be
canceled. Press TIMER ON/OFF to enter
the timer standby mode if you set other
timer recordings. The TIMER indicator
lights up.
2
Press VCR PLUS+ to display the
VCR PLUS+ setting screen.
• If you press VCR PLUS+ when the
clock has not been set, the clock
setting screen will appear.
T I M E R P R O G R A M
P L U S C O D E N O . -
O N C E W E E K L Y D A I L Y
S E L E C T :
R E M A I N : 1 h 1 1 m FINE
U S E N U M B E R K E Y S
E N T E R : R E T U R N : ENTER
Timer Recording with VCR Plus+ ® System
3
Press number buttons to enter
“PLUSCODE NO.” and then press
".
• If you make a mistake in entering the
numbers, press ERASE to erase the
numbers one by one or press \
\ \ \ \ / | | | | | to
move the cursor, then re-enter the
correct number.
T I M E R P R O G R A M
P L U S C O D E N O . 1 2 3 4
O N C E W E E K L Y D A I L Y
S E L E C T : C H A N G E :
R E M A I N : 1 h 1 1 m FINE
E N T E R : R E T U R N : ENTER
4
Press \ / | to select “ONCE”,
“WEEKLY” or “DAILY” and then
press SET/ENTER.
• ONCE: To record only once.
• WEEKLY: To record every week at the
same time.
• DAILY: To record everyday at the
same time.
5
The timer program information is
shown on the TV screen. Check
the contents.
• If you want to change any settings,
press \ \ \ \ \ / | | | | | to select items and press
' ' ' ' ' / " " " " " to correct.
• When recording a program on a
channel for the first time, you must
enter the correct channel number on
the screen, other wise the PlusCode
number will not be successfully
decoded.
T I M E R P R O G R A M 1 / 2
D A T E C H S T A R T S T O P
1 / 0 8 0 6 9 : 0 0 PM 9 : 3 0 S P
- / - - - - - - - : - - - - : - - - -
- / - - - - - - - : - - - - : - - - -
- / - - - - - - - : - - - - : - - - -
R E M A I N : 1 h 1 1 m FINE
P L E A S E C H E C K C H A N N E L
S E L E C T : C H A N G E :
E N T E R : R E T U R N : ENTER
6
Press SET/ENTER. The VCR
PLUS+ setting screen will appears.
To program additional timer
settings, repeat steps 3 to 6.
EDIT
100
OPEN/
CLOSE POWER
SKIP
SEARCH
AUDIO
TIMER
ON/OFF
TITLE MENU
ANGLE
SETUP/
FUNCTION DNR
RETURN
REV FWD
SET/
ENTER
VCR PLUS+
TIMER PROG.
REC MODE
PROGRAM AM/PM ERASE
STILL/PAUSE REC
PLAY
STOP
SLOW SKIP
F.ADV
ORIGINAL/
PLAY LIST
DISC
TIMER
CH
DISPLAY
ON
SCREEN
POWER INPUT VOL
CH
TV CONTROL
ZOOM INPUT
DV_RW2U#p45-53.p65 03.1.14, 9:32 AM 52