Backfeed enable – SATO CX208/212 User Manual
Page 93
Backfeed Enable
Command Structure
a
=
0
Disable Backfeed
1
Enable Backfeed
Example:
Placement:
This command should be sent in a separate data
stream.
Default:
Last setting
Command Function
To select the top-of-label sensing method.
Input to Printer
Printer Output
Theres is no printer output as a result of this command.
Special Notes
1. When Backfeed is enabled, the printer will feed the last label of a
print job forward to the dispense/cut position. Upon the receipt of
the next print job, it will retract the label to the first print line
position before printing.
Page 89
PN 9001092 Rev. A
SATO CX208/212 Printers
CX208/212 Programming Guide