SATO CX208/212 - Manual (Page 45)

Graphics, Custom
Command Structure Gabbbccc(data)
a = Specifies format of data stream to follow
B
Binary format
H Hexadecimal format
bbb = Number of horizontal 8 x 8 blocks
001 to 104
ccc = Number of vertical 8 x 8 blocks
001 to 178 (001 to 356 for Expanded Length)
(data)= Hex data to describe the graphic image
Example: GH006006
Placement: May be placed anywhere within the data stream after
the necessary position commands.
Default: None
Command Function To create and print custom graphics (logos, pictures, etc.) on a label.
The graphic image may be printed along with other printed data to
enhance label appearance or eliminate the need for preprinted label
stock. Using a dot-addressable matrix, design the graphic image in 8
dot by 8 dot blocks, then send it in a binary format to the printer.
Printer Input A
H0100V0100GH006006
FFFFFFFFFFFFFFFFFFFFFFFFC00000000003
C00000000003C000FFFFFFF3C00080000013
C00080000013C0009FFFFF13C00080000013
C00080000013C0009FFFFF13C00080000013
C00080000013C000FFFFFFF3C00000000003
C00000000003C00000000003C00000000003
C00000000003C00000000003C00003C00003
C00007E00003C0000FF00003C0000FF00003
C0000FF00003C0000FF00003C00007E00003
C00003C00003C00003C00003C00003C00003
C00003C00003C00003C00003C00003C00003
C00003C00003C00003C00003C00003C00003
C00003C00003C00001800003C00000000003
C00000000003FFFFFFFFFFFFFFFFFFFFFFFF
H0300V0100XSPLEASE PLACE YOUR DISK
H0300V0150XSIN A SAFE PLACE
Q1Z
Page 41 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide