SATO CX208/212 User Manual
Page 57
Special Notes
1. EX0 is effective until AR is sent to reset the printer to its standard
print length, or until the printer is repowered.
2. It may be included in an independent data stream to specify the
size of the maximum print area:
3. This command cannot be used with the
Overlay command.
4. The maximum print lengths with this command are
:
5. These commands only affect the print length. They do not change
the label width set by the
Page 53
PN 9001092 Rev. A
SATO CX208/212 Printers
CX208/212 Programming Guide
CX212
CX212
Maximum Print
Length
4060 dots
20 in.
508 mm
3780 dots
12.6 in.
320 mm