SATO CX208/212 - Manual (Page 59)

Special Notes 1. The print position of a field is affected by both the Rotate
(R and A3) commands.
2. If any part of an image is placed past the maximum number of
dots for standard length.
3. If any part of an image is placed past maximum allowable dots
across the label, that part of the image will be lost.
4. If you attempt to print where there is no paper, you may damage
the print head.
5. For these commands, the leading zeroes do not have to be
entered. The command V1 is equivalent to V0001.
6. The allowable field ranges are:
Page 55 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide
CX208 CX212
Maximum Print
Width
aaaa
832 dots
4.1 in.
104 mm
1230 dots
4.1 in.
104 mm
Maximum Print
Length
bbbb
4060 dots
20 in.
508 mm
3780 dots
12.6 in.
320 mm