Print quantity – SATO CX208/212 User Manual
Page 60
Print Quantity
Command Structure
aaaaaa
=
Total number of labels to print (1 to 65535)
Example:
Placement:
Just preceding
command exists, then preceding that. This command
must be present in every print job.
Default:
None
Command Function
To specify the total number of labels to print for a given print job.
Input to Printer
Printer Output
Three labels containing the data “SATO” wll be printed.
Special Notes
1. To cancel a print job, you must turn off the printer.
3. When used with the
the Print Quantity value should be equal to the total number of
labels to be printed.
4. If you do not specify a Print Quantity, the printer will not print a
label.
5. For this command, leading zeroes do not have to be entered. The
command Q1 is equivalent to Q000001.
Page 56
PN 9001092 Rev. A
SATO CX208/212 Printers
CX208/212 Programming Guide