SATO CX208/212 User Manual
Page 7
2. If you are using the printer’s RS232 interface, it is necessary to set the COM port
on the PC such that the CTS and DSR signals will be ignored. Send your OPEN
“COM” statement in the following way:
OPEN “COM1:9600,E,8,1,CS,DS” AS #1
This sets the RS232 communication parameters of the host PC’s COM1 port for 9600
baud, Even parity, 8 Data bits, 1 Stop bit and directing the port to ignore the CTS and
DSR control signals.
3. You may want to minimize keystrokes and program size by assigning the
character to a string variable since this character is used quite often.
The following two examples in BASIC show a typical example using these hints. Both
of these examples use the Standard Protocol codes.
Printing with the Parallel Port
5
REM Parallel Example
Identifies the program as a parallel port
print label. The “REM” prevents this data
from being sent to the printer and
displays it only on the screen.
10
E$=CHR$(27)
Sets the “E$” string as an
character
20
WIDTH “LPT1:”,255
Sets the width of the output to 255
characters
30
LPRINT E$;"A";
Sends an “
the LPT1 parallel port
40
LPRINT E$;"H400";E$;"V100";E$;"WL1SATO";
Sends the data “SATO” to be to be
placed 400 dots horizontally and 100
dots vertically on the label and printed in
the “WL” font.
50
LPRINT E$;"Q1";
Instructs the printer to print one label.
60
LPRINT E$; “Z”;
Tells the printer that the last command
has been sent. The printer can now
create and print the job.
Printing with the RS232 Port
5
REM RS232 Example
Identifies the program as a RS232 port
print label. The “REM” prevents this data
from being sent to the printer and
displays it only on the screen.
10
E$=CHR$(27)
Sets the “E$” string as an
character.
20
OPEN “COM1:9600,N,8,1,CS,DS” AS #1
Opens the COM1 port for output and
sets the parameters as 9600 baud, No
parity, 8 Data bits, 1 Stop bit and
instructs the port to ignore the CTS and
DSR control signals.
30
PRINT #1,CHR$ (2);
Sends an
decimal “2”) to the printer instructing it to
prepare to receive a message.
SATO CX208/212 Printers
PN 9001092 Rev. A
Page 3
CX208/212 Programming Guide