Start/stop label – SATO CX208/212 User Manual
Page 73
Start/Stop Label
Command Structure
Start Command:
Stop Command:
Example:
See above
Placement:
Default:
None
Command Function
For all print jobs, the Start command must precede the data, and the
Stop command must follow. The print job will not run properly if these
are not in place.
Input to Printer
Printer Output
There is not output for these commands they are not accompanied by
other label printing commands. However, these commands must
precede and follow each print job sent to the printer.
Page 69
PN 9001092 Rev. A
SATO CX208/212 Printers
CX208/212 Programming Guide