Off-line/pause – SATO CX208/212 User Manual
Page 53
Off-Line/Pause
Command Structure
Example:
See above
Placement:
Anywhere in the print job between the
Default:
None
Command Function
To specify the printer to come to an off-line state. When used within a
print job, the printer goes off-line after finishing the print job.
Input to Printer
Printer Output
There is no printer output for this command. The printer is placed in
the Off-Line mode as soon as the current print job is finished.
Special Notes
1. You must press the READY indicator key on the front panel to
return the printer to an On-Line status .
2. Remember, when using this command, that the print job specifies
3. This command will clear the print buffer.
Page 49
PN 9001092 Rev. A
SATO CX208/212 Printers
CX208/212 Programming Guide