Cr code function, Lf code function – Seiko FB-900 User Manual

Page 88

3-29

— 3. Setup options —

1. EPSON mode

If AUTOFEED is selected, the printer checks the AUTO
FEED signal during initialization. It executes a carriage
return with a line feed when the AUTO FEED signal is low.
It executes a carriage return with out a line feed when the
AUTO FEED signal is high. The AUTO FEED signal is
usable only when the PARALLEL interface or AUTO is
selected. A carriage return without a line feed is executed
when the SERIAL interface is selected.

2. IBM or HP mode

If AUTOFEED is selected, a carriage return without a line
feed is executed.

CR code function

Function

CR : CR ONLY

CR : CR + LF

27 CR SETTING

Carriage return without a line feed

CR : AUTOFEED

AUTO FEED signal enabled

Carriage return with a line feed

Supplementary notes

Setting procedures

This function specifies whether or not to feed a line
when the printer receives a carriage return (CR)
command.

LF code function

Function

LF : LF ONLY

LF : LF + CR

28 LF SETTING

Line feed without a carriage return

Line feed with a carriage return

Setting procedures

This function specifies whether or not to execute a
carriage return when the printer receives a line feed
(LF) command.

1~#

#10

#20

#29

#30

#38

#40

#44

#50,

#51

#70

#79

#80

#84

#90

#95

#60

#67