Seiko FB-900 - Manual (Page 203)

9-3 — 9. Software setup functions —
●
Command
HD + @ (1B,7C,60,01,00,40)H (5) Reset (RESET key)
If the printer is reset without saving data, it enters the
condition set when power was turned on.
HD + G + n (1B,7C,60,02,00,47,n)H (6) Printing pressure adjustment (Setup Function #01)
n=0 Normal
1 Normal
2 Dark 1
3 Dark 2
4 Auto
This command specifies the printing pressure in the
currently selected format memory.
HD + c + m+n (1B,7C,60,03,00,63, (7) Head gap adjustment (Setup Function #02)
m,n)H When m = 0,3 Auto mode
n=5 Auto : +5 click
: :
n=1 Auto : +1 click
n=0 Auto : 0 click
n=255 Auto : -1 click
n=254 Auto : -2 click
When m = 1,4 Fixed mode
n=25 Fix : +25 click
: :
n=1 Fix : +1 click
n=0 Fix : 0 click
n=255 Fix : -1 click
n=254 Fix : -2 click
: :
n=251 Fix : -5 click
This command specifies the paper pressure in the currently
selected format memory.
When m=0,1 : Paper thickness adjustment is performed
after the printing head moves to the specified position.
When
m = 3,4 : Paper thickness adjustment is performed
when the command is processed and the printing head does
not move.
HD + p + n1 + n2 (1B,7C,60,03,00,70, (8) TOF position adjustment (Setup Function #03)
n1,n2)H
00
≤
n
≤
63 n = n1 + 256 x n2
TOF: + n/60"
This command specifies the TOF position in the currently
selected format memory.
Hexadecimal
Control code
Corresponding setup function
Code
See page3-8.
See page 3-9.
See page 3-10.