Seiko FB-900 - Manual (Page 193)

— 8. Software commands —
●
IBM Software commands
ESC \ (27)D (92)D (1B)H (5C)H All-character set {0
≤
n1
≤
255}{0
≤
n2
≤
255}
n1 n2 n1 n2 n1 n2 Prints n1 + n2
×
256 characters in the all-character character set.
d1 d2 d1 d2 d1 d2
••• dk ••• dk ••• dk
ESC ] (27)D (93)D (1B)H (5D)H Reverse line feeding.
This command does not execute a carriage return even when an
automatic carriage return is specified.
ESC ^ (27)D (94)D (1B)H (5E)H All-character set for a single character. {0
≤
n
≤
255}
n n n Prints only one character following ESC ^ in the all-character
character set.
ESC _ (27)D (95)D (1B)H (5F)H Specifies or cancels the upper line.
n n n n = 1 : Specifies the upper line.
n = 0 : Cancels the upper line.
ESC d (27)D (100)D (1B)H (64)H Specifies the relative printing position. {0
≤
n1
≤
255}{0
≤
n2
≤
255}
n1 n2 n1 n2 n1 n2 Advances the printing position by (n1 + n2
×
256)/120 inch.
ESC j (27)D (106)D (1B)H (6A)H Stops printing.
After printing, this command activates the buzzer and disables
printing.
Decimal Hex
Symbol Function
Code
8-17