Seiko FB-900 - Manual (Page 148)

5-18 — 5. Bar code and enlarged character function —
(3) Executing form feeding: FF
Format: ASCII FF
Hex 0C
Decimal 12
Function: Executes form feeding.
This command feeds the page to the next TOF position. If there are still enlarged
characters to be printed, they are printed, then form feeding is executed.
(4) Executing carriage return: CR
Format: ASCII CR
Hex 0D
Decimal 13
Function: Executes carriage return.
This command moves the printing position to the left margin without printing any
characters. If the CR SETTING option is set to CR + LF in the EXTENDED
SETUP MODE, a carriage return is executed out after printing.
(5) Initializing the enlarged character mode: DC4 DC4 @
Format: ASCII DC4 DC4 @
Hex 14 14 40
Decimal 20 20 64
Function: Initializes the enlarged character mode.
The following show the default settings for enlarged characters:
Cell expansion: SETUP expansion
Height expansion: SETUP expansion
Width expansion: SETUP expansion
Font: SETUP font
Character pitch: 10 cpi
HMI: Invalid
Cell offset: 6/180”
VMI: Invalid
Character quality: Standard
Character layout: Adjusted to the base line
Rotational angle: 0°
Smoothing: Valid
Top offset: 0/180”
Underscore: Canceled
Character set: Set at enlarged character mode selected
Right and left margins: Margin at enlarged character mode selected
Page length: Length at enlarged character mode selected
Top and bottom margins: Margin at enlarged character mode selected
●
Enlarged character function