Sharp AR-407 - Manual (Page 97)

5-9
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
5 Close the front cover.
● Confirm that the misfeed display is cleared.
Misfeed in the duplex module
NOTE:
If the optional finishers (AR-FN1N, AR-FN2) is fitted, please refer to
chapter 7 Optional Equipment for additional misfeed removal help.
If the misfed paper is in the duplex module or the section below the
exit area:
1 Open the exit area cover carefully.
2 Remove the misfed paper.
1 Open the paper guide, turn roller rotating knob D in the
direction of the arrow and remove the misfed paper.
Close the paper guide.
2 Remove any misfed paper from the duplex module.
● Be careful not to tear the misfed paper during removal.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Paper
guide
Roller rotating knob D