Sharp AR-407 - Manual (Page 161)

8-11
CHAPTER
8
To register accounts
1. Press the “ENTER” key.
2. Enter a 5-digit account number (00001 to 99999) using
the 10-key pad.
● Select a number different from the key operator code number.
3. Press the “ENTER” key.
● If a number that is already registered is entered, the message
“
THIS NUMBER IS ALREADY USED. ” will appear. Press the
“OK” key and enter another number.
4. To enter other account numbers, repeat steps 2 and 3.
Press the “OK” key twice to exit the program.
To delete accounts
1. Press the “DELETE” key.
2. To delete all accounts, press the “DELETE” (ALL
ACCOUNTS) key on the touch panel.
● A message will appear to confirm the selection. Press the
“YES” key to delete all accounts. If you decide not to delete all
accounts, press the “NO” key.
3. To delete an individual account, enter the account
number to be deleted using the 10-key pad.
4. Press the “ENTER” key.
5. Continue with steps 3 and 4 for other account numbers.
Press the “OK” key twice to exit the program.
To change an account number
1. Press the “CHANGE” key.
2. Enter the account number to be changed using the
10-key pad.
3. Enter a new account number.
4. Press the “ENTER” key.
● If a number that is already registered is entered, the message
“
THIS NUMBER IS ALREADY USED. ” will appear. Press the
“OK” key and enter another number.
5. To change other account numbers, repeat steps 2 to 4.
Press the “OK” key twice to exit the program.
KEY OPERATOR PROGRAMS
KEY OPERATOR’S GUIDE
Key operator programs