beautypg.com

Specifications – Sharp AR-407 User Manual

Page 110

background image

6-8

CHAPTER

6

SPECIFICATIONS

GENERAL INFORMATION

Specifications

COPIER

AR-287

AR-337

AR-407

Type

Desktop

Copy system

Dry, electrostatic transfer system

Originals

Sheets, bound documents

Original feed system

Reversing automatic document
feeder (RADF)

Original sizes

Max. A3 (11" x 17")

Copy sizes

Max. A3 (11" x 17"), min. A6 (5-1/2" x 8-1/2")
Image loss:

Max. 5 mm (13/64") (both leading and trailing edges)
Max. 5 mm (13/64") (along all other edges in total)

For paper weight, see page 4-2.

Copying speed

28 copies/min.

33 copies/min.

40 copies/min.

(at 100% copy ratio)

(A4 (8-1/2" x 11"))

(A4 (8-1/2" x 11"))

(A4 (8-1/2" x 11"))

20 copies/min.

24 copies/min.

27 copies/min.

(A4R (8-1/2" x 11"R))

(A4R (8-1/2" x 11"R))

(A4R (8-1/2" x 11"R))

17 copies/min.

21 copies/min.

24 copies/min.

(B4 (8-1/2" x 14"))

(B4 (8-1/2" x 14"))

(B4 (8-1/2" x 14"))

14 copies/min.

17 copies/min.

19 copies/min.

(A3 (11" x 17"))

(A3 (11" x 17"))

(A3 (11" x 17"))

Continuous copy

Max. 999 copies; subtractive counter

First-copy time*

Approx. 5.2 sec.

4.5 sec.

Warm-up time

Approx. 65 sec.

75 sec.

Copy ratio

Variable: 25 to 800% in 1% increments, total

25 to 400% in 1%

776 steps

increments, total
376 steps

(can be set in the horizontal and vertical directions independently)
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%,
141%, 200%, 400%, 800% (25%, 50%, 64%, 77%, 95%, 100%,
121%, 129%, 141%, 200%, 400%, 800%)(800% for the AR-287 and
AR-337 only)

Exposure system

Document glass:

Moving optical source
(stationary platen) with automatic
exposure function

Copy paper feed

Two paper trays with automatic paper feed (500 sheets each);
one bypass tray with 50-sheet automatic feed capability

Fusing system

Heat rollers

Developer system

Magnetic brush development

Light source

Xenon lamp

Resolution

Scan:

400 dpi

Output: 600 dpi

Gradation

Scan:

256 levels

Output: 2 levels (normal copying)

Required power supply

Local voltage ±10% (For this copier’s power supply requirements,
see the name plate located on the left hand side at the rear corner of
the copier.)

* When the copier is in the noise level reduce mode, the first copy time will be several seconds longer.