Sharp AR-407 - Manual (Page 118)

7-6
CHAPTER
7
Staple sort
The STAPLE SORT mode staples A4, A4R, B4, and A3 (8-1/2" x 11",
8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17") size copies. Stapled sets
cannot be delivered to the top tray.
NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. The paper size selected
for the first scanned original will be used for all originals. To copy
different size originals in the STAPLE SORT mode, select the paper
size for the largest original.
Using the RADF
1 Set the originals in the document feeder tray.
● If the number of copies in one set is more than 50 for
A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or
A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be
stapled.
● The stapling position shown in the left figure is the factory
default position.
2 Press the OUTPUT key.
3 Press the “STAPLE SORT” key on the touch panel.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
AUTO
EXPOSURE
Stapling position
READY TO COPY.(DOCUMENT FEEDER MODE)
OUTPUT
TOP TRAY
OFFSET
SORT OFFSET
TRAY
STAPLE
SORT GROUP
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4